top of page

ပုလင်းရေထုတ်လုပ်မှုအတွက်ရေကုသမှု

နိဒါန်း

စျေးကွက်အစီရင်ခံစာများအရလာမည့်လေးနှစ်တာကာလအတွင်းအာရှ၊ လက်တင်အမေရိကနှင့်အာဖရိကတို့တွင်ရေပုလင်းရောင်းအားသည်အလျင်အမြန်တိုးတက်လိမ့်မည်ဟုခန့်မှန်းထားသည်။ အထူးသဖြင့်ဖွံ့ဖြိုးဆဲနိုင်ငံများ၌ကမ္ဘာ့လူ ဦး ရေတိုးပွားမှုကြောင့်သောက်သုံးရေလိုအပ်မှုမှာနှစ်စဉ်တိုးပွားလျက်ရှိသည်။

ROTEK သည်ပြီးခဲ့သည့်ဆယ်စုနှစ် ၂ ခုအတွင်းရေပုလင်းထုတ်လုပ်မှုအတွက်ရေသန့်စင်ရေးစနစ်များထောက်ပံ့ပေးခဲ့သည်။ ရေသန့်စင်စက်၊ ဖြည့်စွက်ခြင်းနှင့်ထုပ်ပိုးခြင်းစက်ကိရိယာများကိုဖြေရှင်းနည်းတစ်ခုအဖြစ်ထောက်ပံ့ပေးသောအခြားပြိုင်ဘက်များနှင့်မတူဘဲ ROTEK သည်ရေသန့်စင်ခြင်းနည်းပညာကိုသာအာရုံစိုက်ပြီး ကျွန်ုပ်တို့၏ ရေသန့်စင်ရေးစနစ်များမှတစ်ဆင့်ပိုမိုစိတ်ချရသော၊ အရည်အသွေးမြင့်သောရေကိုထောက်ပံ့ပေးနိုင်သည်။

ROTEK သည်ရေသန့်စက်နည်းအမျိုးမျိုးကိုအသုံးပြုသည်။

  • ပြောင်းပြန် osmosis, Ultra-filtration နှင့် Nano-filtration ကိုအပင်

  • မီဒီယာစစ်ထုတ်ခြင်း၊ ရေပျော့ပြောင်းခြင်းနှင့်ဓာတုဆေးထိုးခြင်းစနစ်များ

  • Electro-deionization သီးခြားအဖြစ်သို့မဟုတ် RO နှင့်အတူပေါင်းစပ်အဖြစ်။

  • ဗဓေလသစ်ကိုအခြေခံပြီးအိုင်းလဲလှယ်စနစ်များ

  • ခရမ်းလွန်နှင့် Corona သည်အိုဇုန်းလွှာသန့်စင်စနစ်များကိုထုတ်လွှတ်သည်

Water consumption for each bed is calculated at approximately 50 liters per hour.

Hemodialysis.jpg

စိုးရိမ်ပူပန်မှုများ

ရေအရည်အသွေးသည်ရေပုလင်းထုတ်လုပ်ခြင်းအတွက်အဓိကစိုးရိမ်စရာဖြစ်သည်။ ကုန်ကြမ်းရေသည်သောက်သုံးရေစံနှုန်းနှင့်ကိုက်ညီမှုရှိမရှိရှာဖွေရန်အတွက်ရေသန့်အရည်အသွေးစစ်ဆေးမှုကိုပြီးစီးအောင်ပြုလုပ်ပြီးနောက်ထပ်စနစ်ဒီဇိုင်းအကြံပြုချက်များအတွက်ကျွန်ုပ်တို့ထံပေးပို့ရမည်။

Rotek’s mission is to reduce all contaminants from the raw water to the level that meets standards of
The Association for the Advancement of Medical Instrumentation (AAMI).

hemodialysis_water.jpg
What is Endotoxin?

Viable bacteria and endotoxins in water sometimes cause problems for human health. Endotoxins are major components of the outer cell wall of gram-negative bacteria. in medical procedures, especially hemodialysis (HD) and related therapies HDF and HF, endotoxins in the water for hemodialysis can permeate through the hemodialysis membrane and cause microinflammation or various related illnesses. To decrease such a biological risk, RO and UF membranes are generally used. Also, hot water disinfection.​

endotoxin.jpg
Design Criteria

Based on the raw water quality analysis, we will provide our design suggestions followed by the 4 major treatment setups:

Filtration Systems
This section is responsible for filtering out most of the fine particles, heavy metals, chlorine, organic matter, bacteria, color & odors. The filtration system usually consists of a Clino-X Multimedia Sand Filter, Activated Carbon Filter, Water Softener, Ultra-Filtration System, Anti-Scale, and Chlorination Chemical Dosing Systems.

1st Pass Purification Systems
Reverse osmosis (RO) is a water purification technology that ROTEK uses most of the time for many industries. RO can remove many types of molecules and ions from solutions and is used in both industrial processes and to produce potable water. Depending on the raw water quality, if raw water TDS is below 50 ppm, then this section of the purification system may not be required as part of the design for bottled water production.

 

Remineralization Systems

Although RO removes everything from the water (including good and bad minerals),
however low-mineralized water has a few adverse effects:
- High corrosion potential
- Dietary deficiency causes risks of ischaemic heart and cerebrovascular disease (WHO, 2005a; WHO, 2006; Cotruvo, 2006)
The WHO recommends 10 mg/L of Magnesium and 30 mg/L of Calcium for drinking water. Therefore adding beneficial minerals to the product water is a process called r
emineralization. ROTEK uses natural minerals called "Camag" for adding pure Magnesium and Calcium to the product water with great improvement on the taste and pH level.

Disinfection Systems
The most common bacteria found in bottled water is Pseudomonas fluorescens, which is common in freshwater springs. It is not considered to be a health threat until you leave the bottle open for extended periods and the bacteria begin to react with the carcinogens in the plastic. Reducing bacteria and microbial to the minimum is the most important issue in the bottled water production business. ROTEK disinfection system consists of UV sterilizer, Nanosilver Activated Carbon, 0.2-micron filter, and ozone disinfection. With four levels of protection, the ROTEK disinfection system will make sure the bacteria level is reduced to nil before filling the bottle.

bottom of page